Snake AC – High Current Power Supply with AC capability
The Snake AC power supply provides a HI Current power supply for effect pedals with multiple output voltages and AC capability, in a light weight, rugged and reliable form.
The Snake AC has 5 output groups for a total of 7 HI current outputs simultaneously useable at full power.
The output voltage is 9.6 VDC @ 400 mA on groups 1 and 2 (each with 4 output connectors), 12 VDC @ 800 mA on group 3 and 9 VAC or 12 VAC on group 4 and 5.
The alternate current outputs provide up to 1300 mA continuously.
All the outputs can supply maximum power simultaneously, this makes the Snake AC one of the most powerful HI current PSUs for pedalboards available on the market today.
All the output groups are galvanically isolated and thanks to the ground isolations and the use of quality electronic components, the noise floor and ground loop hum is considerably reduced.
* The common 9V battery (6LR61) used in effects pedals, if fully charged, provide a voltage of 9.6VDC.
High Current Power Supply
- High Current AC and DC voltage available.
- 4200 mA current available.
- 9 and 12 V AC and DC.
- High stability.
- Small size and weight.
No. 2 Output cable 2.5 mm right-angle red connectors. Length 75 cm
No. 5 Output cable 2.1 mm right-angle black connectors. Length 75 cm
No. 1 Power cable Schuko-IEC
Power supply: 230V ±10% 50/60Hz. Protection against short circuit. (EU Model)
Power supply: 120V ±10% 50/60Hz. Protection against short circuit. (US Model)
Power consumption: 60 VA at full load.
- CH1 – CH2 -> 9.6 VDC 400 mA/3.9 W
- CH3 – CH4 -> 9.6 VDC 400 mA/3.9 W
- CH5 -> 12 VDC 800 mA/9.6 W
- CH6 -> 9 VAC 1300 mA/9.2 W or CH7 -> 12 VAC 1300 mA/13.3 W
- CH8 -> 9 VAC 1300 mA/9.2 W or CH9 -> 12 VAC 1300 mA/13.3 W
Outputs are protected against accidental short circuit.
Dimensions (mm): L:180 W:90 H:61
Weight (Kg): 1.5
Environmental Conditions: 10 to 40 ° C, 30-90% RH non-condensing.
Do not use this product above an altitude of 2000m.