Tentacles Hum Free Regulated Power Supply
Visualizza carrello Prodotto aggiunto al tuo carrello.
€115,00 IVA inclusa
The Tentacles power supply provides a compact, robust and reliable pedalboard power supply.
The output voltage is 9.6 VDC* that makes the Tentacles power supply suitable to powering all effect pedals running at 9 VDC.
The Tentacles has 2 groups of outputs galvanically isolated with four connections for each group. Due to the separation of the grounds and to the use of quality electronic components, the noise floor is considerably reduced.
The rugged construction allows the Tentacles to deliver maximum power without fluctuations of the voltage supplied.
* The common 9V battery (6LR61) used in effect pedals, if fully charged, provides a voltage of 9.6VDC.
High quality at the lowest price
- 8 ouputs and 2 groups of isolated grounds.
- 800 mA total current available.
- High stability.
- Small size and weight.
Oktopus plus noiseless power supply
“THE FINEST POWER SUPPLY EVER MADE FOR PEDALBOARDS”
The Oktopus plus noiseless power supply comes from the need to have a robust power supply, reliable and extremely silent to provide the necessary stabilized DC voltage at the various effects pedals.
The Oktopus plus implements all the sophisticated features, adding versatility and compactness.
The power supply, often overlooked, is instead a crucial stage for any electronic device. Only after connecting the Oktopus plus you can hear how a power supply built without compromise will bring the benefits of sound effects chain.
The noise floor is greatly reduced or even undetectable, the dynamics will increase significantly, as well as touch sensitivity.
This thanks to the use of the best electronic components on the market and the unique modular design that allows to keep the grounds that feed the individual pedals always isolated from each other, thus eliminating the ground loops (typical of the power supplies in parallel or daisy chain).
The rugged aluminum case creates an excellent protection of the electromagnetic field generated by internal toroidal transformer, it is still designed for audio applications, has already reduced emissions. Given the strength of the structure and the reduced height, 45mm or so, you can place on the top panel up to three effects pedals (typical size), allowing a considerable saving of space on the pedalboard.
The Oktopus plus has nine separate outputs and thanks to the ability to adjust, the value of the voltage supplied from some of them,
the Oktopus plus is able to feed almost all of the pedals effect on the market.
All outputs are protected against accidental short circuit.
Each channel has a LED which indicates the proper functioning.
The output connections are made through isolated plug, Cliff, 2.1 mm with a negative tip while for the output n° 9 (the 18-24V) the connector is a 2.5mm type.
The Outputs 1 and 2 have parallel connectors which allows, within the current limits that can be delivered, to connect two additional devices.
Note: By using the parallel connection the ground isolation for these outputs will be lost.
“..After hooking up all my pedals, I switched on and there was no more hum, whine or buzz other than that coming from my guitar pickup. The improvement was dramatic…”
IT DOES NOT PLAY BUT WITH IT EVERYTHING ELSE SOUNDS BETTER
- 9 outputs with true isolated grounds to avoid ground loops and hum.
- Toroidal power tranformer designed for audio application.
- Rugged aluminum case for unique EMI RFI isolation.
- High stability: The Oktopus power supply can supply the maximum current declared, simultaneously on all channels, without changes in the outputs voltages.