Snake AC – High Current Power Supply with AC capability
The Snake AC power supply provides a HI Current power supply with multiple output voltages and AC capability, in a light weight, rugged and reliable form.
The Snake AC has 5 output groups for a total of 7 Hi current outputs simultaneously useable at full power.
The output voltage is 9.6 VDC @ 400 mA on groups 1 and 2 (each with 4 output connectors), 12 VDC @ 800 mA on group 3 and 9 VAC or 12 VAC on group 4 and 5.
The alternate current outputs provide up to 1300 mA continuously.
All the outputs can supply maximum power simultaneously, this makes the Snake AC one of the most powerful Hi current PSUs available on the market today.
All the output groups are galvanically isolated and thanks to the ground isolations and the use of quality electronic components, the noise floor and ground loop hum is considerably reduced.
* The common 9V battery (6LR61) used in effects pedals, if fully charged, provide a voltage of 9.6VDC.
High Current Power Supply
- High Current AC and DC voltage available.
- 4200 mA current available.
- 9 and 12 V AC and DC.
- High stability.
- Small size and weight.
Oktopus plus noiseless power supply
“THE FINEST POWER SUPPLY EVER MADE FOR PEDALBOARDS”
The Oktopus plus noiseless power supply comes from the need to have a robust power supply, reliable and extremely silent to provide the necessary stabilized DC voltage at the various effects pedals.
The Oktopus plus implements all the sophisticated features, adding versatility and compactness.
The power supply, often overlooked, is instead a crucial stage for any electronic device. Only after connecting the Oktopus plus you can hear how a power supply built without compromise will bring the benefits of sound effects chain.
The noise floor is greatly reduced or even undetectable, the dynamics will increase significantly, as well as touch sensitivity.
This thanks to the use of the best electronic components on the market and the unique modular design that allows to keep the grounds that feed the individual pedals always isolated from each other, thus eliminating the ground loops (typical of the power supplies in parallel or daisy chain).
The rugged aluminum case creates an excellent protection of the electromagnetic field generated by internal toroidal transformer, it is still designed for audio applications, has already reduced emissions. Given the strength of the structure and the reduced height, 45mm or so, you can place on the top panel up to three effects pedals (typical size), allowing a considerable saving of space on the pedalboard.
The Oktopus plus has nine separate outputs and thanks to the ability to adjust, the value of the voltage supplied from some of them,
the Oktopus plus is able to feed almost all of the pedals effect on the market.
All outputs are protected against accidental short circuit.
Each channel has a LED which indicates the proper functioning.
The output connections are made through isolated plug, Cliff, 2.1 mm with a negative tip while for the output n° 9 (the 18-24V) the connector is a 2.5mm type.
The Outputs 1 and 2 have parallel connectors which allows, within the current limits that can be delivered, to connect two additional devices.
Note: By using the parallel connection the ground isolation for these outputs will be lost.
“..After hooking up all my pedals, I switched on and there was no more hum, whine or buzz other than that coming from my guitar pickup. The improvement was dramatic…”
IT DOES NOT PLAY BUT WITH IT EVERYTHING ELSE SOUNDS BETTER
- 9 outputs with true isolated grounds to avoid ground loops and hum.
- Toroidal power tranformer designed for audio application.
- Rugged aluminum case for unique EMI RFI isolation.
- High stability: The Oktopus power supply can supply the maximum current declared, simultaneously on all channels, without changes in the outputs voltages.